Bootrom Update - HP 6125XLG Command Reference Manual

Examples
# Synchronize startup images from the master device to subordinate device 2.
<Sysname> boot-loader update slot 2
This command will update the specified standby MPU. Continue? [Y/N]:y
Updating. Please wait...
Copying main startup software images to slot 2. Please wait...
Done.
Setting copied images as main startup software images for slot 2...
Done.
Successfully updated the startup software images of slot 2.
Related commands
display boot-loader
•

bootrom update

Use bootrom update to load the BootWare image in the flash to the Normal area of BootWare.
Syntax
bootrom update file file-url slot slot-number-list
Views
User view
Predefined user roles
network-admin
Parameters
file file-url: Specifies the file that contains the BootWare image in the flash. The file-url argument
represents the file name, a string of 1 to 63 characters.
slot slot-number-list: Specifies a space-separated list of up to seven IRF member ID items. Each item
specifies an IRF member device by its member ID or a range of IRF member devices in the form of
start-member-id to end-member-id. For example, slot 0 to 1 2.
Usage guidelines
If a software upgrade requires upgrading the BootWare image, you can use this command to preload
the new BootWare image to the BootWare before upgrading Comware images. This command helps
shorten the subsequent upgrade time, reducing the risk of upgrade failure caused by unexpected
electricity failure.
To complete the upgrade, reboot the device.
To save space, you can delete the BootWare image in the flash after completing the BootWare image
upgrade.
Examples
# Use the file a.btm to upgrade the BootWare image.
<Sysname> bootrom update file a.btm slot 1
This command will update the BootWare file, Continue? [Y/N]:y
Now updating the BootWare, please wait...
...............Done.
141