Registration Memory
7
7
- Saving and Recalling Custom Panel Setups -
Editing a Registration Memory
You can edit (rename and delete) each of Registration Memories contained in the Bank.
1
Select the Registration Memory Bank containing the Registration Memory to be edited.
Press the REGISTRATION BANK [+]/[-] buttons simultaneously to call up the Registration Bank Selection dis-
play, then press one of the [A]-[J] buttons to select the desired Bank.
2
Make sure the MENU 1 is shown at the bottom right corner of the display.
3
Press the [7 ] (EDIT) button to call up the REGISTRATION EDIT display.
4
Select a particular Registration Memory to be edited by pressing any of the [A]-[D] and
[F]-[I] buttons.
5
Press the [1 ] button to rename or the [5 ] button to delete the selected Registration
Memory.
For details on the Rename and Delete operations, refer to the Basic Operations of the Owner's Manual.
6
Save the current Bank containing the edited Registration Memories.
Press the [8 ] button to call up the Registration Memory Selection display. Change MENU 1 to MENU 2 by
pressing the [8 ] button, then press the [6 ] (SAVE) button to execute the Save operation.
Contents
.......................................................................................................... 97
Sequence................................................................ 99
...................................................................... 95
................................................... 96
................................................ 98
Tyros5 Reference Manual
7
95