Yamaha Tyros5 Reference Manual page 79

Next, mix all data from the Main track and Sub track to one track (Main track). This procedure (below) is called Bounce
recording.
8
Press the [B] (REC MODE), and then use the [B]/[C] buttons to
select "BOUNCE."
After selection, press the [EXIT] button to return to the previous display.
9
Press the [REC] button then press the [G] (YES) button.
If you do not want to delete the recorded data of the Sub track, press the [H] (NO) button instead of the [G] (YES)
button above.
10
Press the [PLAY/PAUSE] button to start Bounce recording.
All data in Main and Sub tracks are mixed and recorded to the Main track. When
playback of the Main and Sub tracks is finished, Bounce recording automatically
stops.
11
To hear your new recording, press the [PLAY/PAUSE] button.
The Sub track is now empty, you can continue recording another part to the Sub
track, repeating Steps 6–7.
If you did not delete the recorded data of the Sub track in Step 9, the data of Sub
track is recorded to both Main and Sub tracks. To avoid duplicate playback of Sub
track, press the [5 ] (MUTE) button in the Multi Track Recorder display.
12
Press the [EXIT MULTI TRACK] button, then press the [G] (YES)
button to exit from the Multi Track Recorder display.
At this point, the recorded data have not been processed with the Mixdown opera-
tion (converting a Multi Track recording file to a Simple recording file).
If Mixdown is necessary, refer to the "Converting a Multi Track Recording File
(.aud) to an Audio File (.wav/.mp3)" on page 81.
NOTE
When the Recording Mode is set to
"BOUNCE," the selected track is auto-
matically changed to Main.
NOTE
If you sing or play the keyboard during
Bounce recording, your performance is
also recorded to the Main track.
NOTE
• The Multi Track recording file (.aud)
can be played back only on the
Tyros5.
• The .aud file saved with the Multi
Track recording can be converted to
.wav file format (Simple recording
file) by using the Mixdown function.
NOTE
You can convert the Multi Track record-
ing file (.aud) to a Simple recording file
.(wav). For details, see the "Converting
a Multi Track Recording File (.aud) to an
Audio File (.wav/.mp3)" on page 81.
Tyros5 Reference Manual
5
79