Editing The Synth Vocoder Types - Yamaha Tyros5 Reference Manual

Editing the Synth Vocoder Types

This section explains how to create your own Synth Vocoder types, and lists the detailed
parameters for editing. A sum total of sixty types (Synth Vocoder and Vocal Harmony
types) can be created and saved.
1
Press the [VH TYPE SELECT] button to call up the Vocal Harmony Type Selection dis-
play.
2
Use the TAB [][] buttons to select the Synth Vocoder tab.
2
3
3
Select a Synth Vocoder type to be edited by using the [A]–[J] buttons.
4
Press the [8 ] (EDIT) button to call up the Synth Vocoder Edit display.
5
Use the TAB [][] buttons to call up the desired tab, then edit
the Synth Vocoder by using [A]–[E], [G] and [J] buttons and [1
]–[8 ] buttons or sliders.
There are two tabs in the Synth Vocoder Edit display; refer to
editing each tab.
• OVERVIEW........... Edits basic parameters for Synth Vocoder type, including
• DETAIL .................. Detailed editing for Synth Vocoder type.
6
Press the [I] (SAVE) button to save your edited Synth Vocoder type.
4
Carrier, Vocoder Attack/Release and HPF (High Pass Fil-
ter), etc.
For information on "Editing the Vocal
Harmony Types," refer to
5
5
NOTICE
The settings here will be lost if
you change to another Synth
Vocoder type or you turn the
pages 112–114 for
power off without executing the
save operation.
Tyros5 Reference Manual
NOTE
page 106.
6
111
8