Yamaha Tyros5 Reference Manual page 23

 VOLUME / PAN
[A] VOICE
[C] PART ON/OFF
[D] PANPOT
[E] VOLUME
[3 ]–
[6 ]
 TUNE / EFFECT
[B] OCTAVE
[C] TUNING
[D] REVERB DEPTH
NEXT PAGE
Allows you to re-select the Voices for each part. You can also select this by using the
PART SELECT buttons. The PART 1–4 settings correspond to the PART SELECT
[LEFT], [PART 1-3] buttons.
NOTE
Only the recommended Voices that are suitable for Ensemble Voices can be selected.
Turns each part on or off. The PART 1–4 settings correspond to the PART ON/OFF
[LEFT], [PART 1-3] buttons.
Determines the stereo position of the selected part.
Determines the volume of each part or channel, giving you fine control over the bal-
ance of all the parts. These parameters correspond to the LEFT and RIGHT 1–3
parameters of the VOL/VOICE tab in the MIXING CONSOLE display.
Selects the part to which the editing is applied, then set the value for each part.
Determines the range of the pitch change in octaves, over two octaves up or down for
each keyboard part. The value set here is added to the setting made via the OCTAVE
[-]/[+] buttons.
Determines the pitch of each keyboard part in cents.
NOTE
In musical terms, a "cent" is 1/100th of a semitone. (100 cents equal one semitone.)
Adjusts the reverb depth.
Tyros5 Reference Manual
1
23