Bass Note Settings For Style Playback Via Midi Receive; Chord Type Settings For Style Playback Via Midi Receive - Yamaha Tyros5 Reference Manual

Bass Note Settings for Style Playback via MIDI Receive

The explanations here apply to the BASS page in step 4 on
for Style playback, based on the note messages received via MIDI. The note on/off messages received at the
channel(s) set to "ON" are recognized as the bass note of the chord of Style playback. The bass note will be detected
regardless of the [ACMP] or split point settings. When several channels are simultaneously set to "ON," the bass note
is detected from merged MIDI data received over the channels.
1
1
Use the [A]/[B] buttons to select the desired row of channels.
2
Use the [1 ]–[8 ] buttons to set specific channels to ON or OFF.
You can also set all channels to OFF by pressing the [I] (ALL OFF) button.

Chord Type Settings for Style Playback via MIDI Receive

The explanations here apply to the CHORD DETECT page in step 4 on
channels over which the MIDI data from the external device will be used to detect the Chord Type for Style playback.
The note on/off messages received at the channel(s) set to "ON" are recognized as the notes for detecting chords in
Style playback. The chords to be detected depend on the fingering type. The chord types will be detected regardless of
the [ACMP] or split point settings. When several channels are simultaneously set to "ON," the chord type is detected
from merged MIDI data received over the channels.
The operation procedure is basically the same as that of the BASS display above.
2
page 136. These settings let you determine the bass note
page 136. This page lets you select the MIDI
Tyros5 Reference Manual
11
141