Disabling Automatic Selection Of Voice Sets (Effects, Etc.) - Yamaha Tyros5 Reference Manual

Disabling Automatic Selection of Voice Sets (Effects, etc.)

Each Voice is linked to its default VOICE SET parameter settings. Usually these settings are automatically called up
when a Voice is selected. However, you can also disable this feature by the operation in the relevant display as
explained below. For example, if you want to change the Voice yet keep the same Harmony effect used with the
previous Voice, set the HARMONY/ECHO parameter to OFF (in the display explained below).
1
Call up the operation display.
[FUNCTION]  [E] REGIST SEQUENCE/FREEZE/VOICE SET  TAB [E][F] VOICE SET
2
Use the [A]/[B] buttons to select the desired keyboard part.
3
Use the [4 ]–[7 ] buttons to turn on or off of each item for the selected Part.
When the button is set to ON, the corresponding parameter settings are called up automatically together with the
Voice selection. For information on which parameters are linked to each item, see below.
[4 ]
VOICE
[5 ]
EFFECT
[6 ]
EQ
[7 ]
HARMONY/
ECHO
16 Tyros5 Reference Manual
2
Corresponds to the parameter settings of the COMMON, CONTROLLER, and
SOUND pages.
Corresponds to the parameter settings of 1 and 2 in the EFFECT/EQ page.
Corresponds to the parameter settings of 3 in the EFFECT/EQ page.
Corresponds to the HARMONY page.
3