Saving And Recalling Custom Panel Setups With Registration Memory - Yamaha PortableGrand DGX-670 Owner's Manual

Saving and Recalling Custom Panel Setups with Registration Memory

Registering Your Panel Setups
1
Make the desired panel settings, such as those for Voices, Styles and Effects.
Refer to Parameter Chart in the Data List on the website for a list of parameters that can be
registered with the Registration Memory function.
2
Press the REGISTRATION MEMORY [MEMORY] button to call up the
Registration Memory window.
3
Use the Cursor buttons [
press the [ENTER] button to enter (or remove) the corresponding checkmark.
To cancel the operation, use the [8
NOTE
You can also use the Data dial to select the items.
4
Press the desired REGISTRATION MEMORY [1] – [4] button to which you wish to
memorize the panel setup.
Memorized buttons are lit in orange, indicating that the number button contains data and its
number is selected.
NOTICE
If you select the button whose lamp is lit in orange or green here, the panel setup previously memorized to the
button will be erased and replaced by the new settings. Hence, you should memorize panel setups only to buttons
that are turned off.
About the lamp status
Orange:
• Data registered and currently selected
Green:
• Data registered but not currently selected
Off:
• No data registered
][ ][L][R] to select the item to be registered, and then
U D
] (Cancel) buttons.
UD
3
81
DGX-670 Owner's Manual
7