Setup Parameters - Yamaha Tyros5 Reference Manual

Setup Parameters

[2 ]–
VOCODER
[5 ]
CONTROL
[2 ]
SONG
CHANNEL MUTE/
PLAY
[3 ]
SONG
CHANNEL
OFF/1–16
[4 ]
KEYBOARD
/[5 ]
[7 ]
CHORD
The Vocal Harmony effect in the Vocoder and Vocoder-Mono modes is controlled
by the notes you play on the keyboard and/or Song data.
When set to "MUTE," the channel selected below (to control Harmony) is muted
(turned off) during Song playback. This enables you to sing a song with harmony,
even without backing or accompaniment.
When set to OFF, Song playback does not affect the Vocal Harmony. When set to
one of the values 1–16, note data (played from a Song on this instrument or exter-
nal MIDI sequencer) contained on the corresponding channel is used to control the
harmony.
OFF: Keyboard performance does not affect the Vocal Harmony.
UPPER: Notes played to the right of the Split Point control the harmony.
LOWER: Notes played to the left of the Split Point control the harmony.
NOTE
The separate point of the Keyboard settings (OFF/UPPER/LOWER) is Split Point (L).
NOTE
When the settings of both keyboard performance and Song data are applied, those settings are merged
to control the harmony.
In Chordal mode, the following parameters determine which data in a Song is used
for chord detection.
OFF: Chords are not detected from the Song data.
XF: Chords of XF format are used for the Vocal Harmony.
1–16: Chords are detected from note data in the specified Song channel.
NOTE
The Vocal Harmony may not work properly regardless of the setting here depending on the Song data.
This occurs when the selected Song contains no chord data or has insufficient note data for chord
detection.
Tyros5 Reference Manual
8
105