Editing Master Compressor Settings; Editing And Saving Your Original Master Eq Type - Yamaha Tyros5 Reference Manual

Editing and Saving Your Original Master EQ Type

1
Press the [F] (EDIT) button in the EQ Page.
The MASTER EQ EDIT display is called up.
2
2
Use the [B]/[C] buttons to select a preset EQ type.
The set parameters of the selected EQ type are automatically shown at the bottom of the display.
3
Use the [3 ]–[7 ] buttons to boost or cut each of the five bands.
Use the [8 ] buttons to boost or cut all the five bands at the same time.
4
If desired, adjust the Q (bandwidth) and the FREQ (center frequency) of the band
selected in step 3.
To adjust the bandwidth (also called "Shape" or "Q"), use the [1 ] buttons. The higher the value of Q, the nar-
rower the band width.
To adjust the FREQ (center frequency), use the [2 ] buttons. The available FREQ range is different for each
band.
5
Press the [H] or [I] (STORE 1 or 2) button to execute the Store operation.
In the Naming display called up via this operation, assign the name then press the [8 ] (OK) button to store your
settings as a User Master EQ Type, which can be called up via the [B]/[C] buttons.

Editing Master Compressor Settings

For details, refer to the Owner's Manual.
4 3
5
Tyros5 Reference Manual
9
123