Yamaha Tyros5 Reference Manual page 119

2
In the EFFECT page, press the [F] (TYPE) button to call up the Effect Type Selection dis-
play.
3
Press the [A] button.
4
Use the [1 ]/[2 ] buttons to select the Effect Block.
Effect Effect-applicable parts
Block
REVERB All parts
CHORUS All parts
DSP1 STYLE PART,
SONG CHANNEL 1–16
DSP2, RIGHT 1, RIGHT 2,
DSP3, RIGHT 3, LEFT,
DSP4, SONG CHANNEL 1–16
DSP5,
DSP6
DSP7 Microphone sound,
SONG CHANNEL 1–16
DSP8, STYLE PART
DSP9
5
Use the [3 ]/[4 ] buttons to select the Part to which you want to apply the effect.
Note that a Part cannot be selected if "REVERB," "CHORUS," or "DSP1" is selected. This is because only one of
the Effect Types can be selected to be commonly applied to all available Parts.
6
Press the [B] button.
7
Use the [1 ]/[2 ] buttons to select the Category then use the [3 ]–[5 ] but-
tons to select the Effect Type.
Note that the Reverb Block is not divided into any Categories.
If you want to edit detailed Parameters of the selected Effect Type, press the [H] (DETAIL) button. For details,
refer to the next section.
8
Save the Effect Settings to a Registration Memory, Song or Style.
For instructions, refer to the Owner's Manual.
3
6
Effect characteristics
Reproduces the warm ambience of playing in a concert hall or jazz club.
Produces a rich, "fat" sound as if several parts are being played simultane-
ously. In addition, other type effects (such as reverb, delay, etc.) can also be
selected in this effect block.
This effect is applied only to Style/Song parts.
Any unused DSP blocks are automatically assigned to the appropriate parts
(channels) as needed. Only one DSP block can be assigned to each keyboard
or Song part.
This effect is applied to the MIC input (in addition to the Vocal Harmony
effect)/Song parts.
These effects are applied only to Style parts.
4 5 7
Tyros5 Reference Manual
9
119