Calling Up Registration Memory Numbers In Order (Registration Sequence) - Yamaha Tyros4 Reference Manual

Calling Up Registration Memory Numbers in Order (Registration Sequence)

As convenient as the Registration Memory buttons are, there may be times during a performance when you want to
quickly switch between settings—without having to take your hands from the keyboard. The convenient Registration
Sequence function lets you call up the eight setups in any order you specify, by simply using the TAB [][] buttons or
the pedal as you play.
1
Select the desired Registration Memory bank to program a
sequence.
2
Call up the operation display.
[FUNCTION]  [E] REGIST SEQUENCE/FREEZE/VOICE SET  TAB
[][] REGISTRATION SEQUENCE
3
If you intend to use a pedal to switch Registration Memory set-
tings, specify here how the pedal will be used—to advance or
to reverse through the sequence.
Use the [C] (REGIST+ PEDAL) button to select the pedal for advancing through
the sequence.
Use the [D] (REGIST- PEDAL) button to select the pedal for reversing through the
sequence.
3
4
4
Use the [E] (SEQUENCE END) button to determine how Regis-
tration Sequence behaves when reaching the end of the
sequence.
• STOP....................... Pressing the TAB [] button or the "advance" pedal has no
• TOP......................... The sequence starts again at the beginning.
• NEXT BANK ......... The sequence automatically moves to the beginning of the
5
Program the Sequence order, from left to right.
Press one of the REGISTRATION MEMORY [1]–[8] buttons on the panel, then
press the [6 ] (INSERT) button to input the number.
NEXT PAGE
Indicates the name of the currently selected
Registration Memory Bank.
effect. The sequence is "stopped."
next Registration Memory Bank in the same folder.
NOTE
If you assign the function to a pedal
here, the other function set in the Foot
Pedal display (page 121) becomes
invalid.
6
Indicates the Registration Memory
numbers, in the order of the current
Registration Sequence.
Tyros4 Reference Manual
6
85