Midi System Settings; Local Control - Yamaha Tyros5 Reference Manual

MIDI System Settings

The explanations here apply to the SYSTEM page in step 4 on
Use the [A]/[B] buttons to select the parameters (below), then set the ON/OFF status by using the [1 ]–[8 ]
buttons.
 1 Local Control
Turns the Local Control for each part on or off. When Local Control is set to "ON," the keyboard of the instrument
controls its own (local) internal tone generator, allowing the internal Voices to be played directly from the keyboard. If
you set Local to "OFF," the keyboard and controllers are internally disconnected from the instrument's tone generator
section so that no sound is output when you play the keyboard or use the controllers. For example, this allows you to
use an external MIDI sequencer to play the instrument's internal Voices, and use the instrument keyboard to record
notes to the external sequencer and/or play an external tone generator.
 2 Clock setting, etc.
CLOCK
Determines whether the tempo of the Songs, Styles, etc. are controlled by the
instrument's own internal clock or a MIDI clock signal received from an external
device. INTERNAL is the normal Clock setting when the instrument is being used
alone or as a master keyboard to control external devices. If you are using the
instrument with an external sequencer, MIDI computer, or other MIDI device, and
you want to synchronize it to that device, set this parameter to the appropriate set-
ting: MIDI, USB 1, or USB 2. In this case, make sure that the external device is
connected properly (e.g., to the instrument's MIDI IN terminal), and that it is
properly transmitting a MIDI clock signal.
TRANSMIT CLOCK
Turns MIDI clock (F8) transmission on or off. When set to OFF, no MIDI clock or
Start/Stop data is transmitted even if a Song or Style is played back.
RECEIVE TRANSPOSE
Determines whether or not the instrument's transpose setting is applied to the note events received by the instru-
ment via MIDI.
START/STOP
Determines whether incoming start and stop messages (FA, FC) affect Song or Style playback.
 3 MESSAGE SW (Message Switch)
SYS/EX.
The "Tx" setting turns MIDI transmission of MIDI System Exclusive messages on or off. The "Rx" setting turns
MIDI reception and recognition of MIDI System Exclusive messages generated by external equipment on or off.
CHORD SYS/EX.
The "Tx" setting turns MIDI transmission of MIDI chord exclusive data (Chord Detect, root and type) on or off.
The "Rx" setting turns MIDI reception and recognition of MIDI chord exclusive data generated by external equip-
ment on or off.
138 Tyros5 Reference Manual
page 136.
NOTE
• When CLOCK is set to a value other
than INTERNAL, the tempo is indi-
cated as "EXT." on the Main display.
This means that playback of this
instrument is controlled only from an
external MIDI device or computer. In
this condition, Styles, Songs, Multi
Pads or the Metronome cannot be
played back even if you execute the
start operation.
• When the Wireless LAN Adaptor is
connected to the USB TO DEVICE ter-
minal, the "WIRELESS LAN" parame-
ter appears.