Editing The Vocal Harmony Types - Yamaha Tyros5 Reference Manual

Editing the Vocal Harmony Types

This section explains briefly how to create your own Vocal Harmony types, and lists the detailed parameters for
editing. A sum total of sixty types can be created and saved.
1
Press the [VH TYPE SELECT] button to call up the Vocal Harmony Type Selection dis-
play.
2
Select a Vocal Harmony type to be edited by using the [A]–[J] buttons.
To call up the other display pages for further selections, press one of the [1 ]–[5 ] buttons.
2
2
3
Press the [8 ] (EDIT) button to call up the Vocal Harmony Edit display.
4
Use the TAB [E][F] buttons to call up the desired tab, then edit
the Vocal Harmony by using [A]–[G] buttons and [1 ]–
[8 ] buttons.
There are three tabs in the Vocal Harmony Edit display; refer to
editing each tab.
• OVERVIEW
......................Adjusts volume and panning, etc. for each of the har-
• PART
• DETAIL .................Detailed editing for Vocal Harmony type.
5
Press the [I] (SAVE) button to save your edited Vocal Harmony
type.
For details on the Save operation, refer to the Owner's Manual, Basic Operations.
106 Tyros5 Reference Manual
3
...........Edits basic parameters for Vocal Harmony type, includ-
ing Mode, Chordal Type and Vocal Effect, etc.
mony notes (Harm.1, 2, 3 and Lead).
4
4
NOTICE
The settings here will be lost if
you change to another Vocal Har-
mony type or you turn the power
pages 107–110 for
off without executing the Save
operation.
NOTE
The edited Vocal Harmony Type can be
saved only to internal USER drive as a
file. If you want to save this to USB flash
memory, save the User Effect file on the
display called up via [FUNCTION] 
[H] (UTILITY)  SYSTEM RESET 
[H] (USER EFFECT).
5