Using Keyboard Harmony/Echo - Yamaha Tyros5 Reference Manual

Using Keyboard Harmony/Echo

You can select the desired Harmony/Echo effect from a variety of types.
1
Turn the [HARMONY/ECHO] button on.
2
Call up the operation display.
[FUNCTION]  [F] HARMONY/ECHO
3
Use the [1 ]–[3 ] buttons to select the Harmony/Echo
type.
The Harmony/Echo types are divided into three groups (Harmony Types, Multi
Assign Type, and Echo types), depending on the particular effect applied.
4
Use the [4 ]–[8 ] buttons to select various Harmony/Echo settings.
The available settings differ depending on the Harmony/Echo type.
Harmony Types (see below)
Multi Assign Type (see below)
Echo Types (see below)

[4 ] VOLUME

[5 ] SPEED

[6 ] ASSIGN

[7 ] CHORD NOTE
ONLY

[8 ] TOUCH LIMIT
8 Tyros5 Reference Manual
3
This parameter is available for all types with the exception of "Multi Assign." It deter-
mines the volume level of the Harmony/Echo notes generated by the Harmony/Echo
effect.
This parameter is only available when Echo, Tremolo, or Trill is selected in Type
above. It determines the speed of the Echo, Tremolo, and Trill effects.
Determines the keyboard Part that the effect is assigned.
AUTO: Applies the effect to the part for which PART ON/OFF is on. When more
than one parts are on, the RIGHT 1 part is given priority over the RIGHT 2/3 part.
In a similar way the RIGHT 2 part is given priority over the RIGHT 3 part.
MULTI: When more than one parts are on, the note played on the keyboard is
sounded by the RIGHT 1 part and the harmonies (effect) are divided to the RIGHT
1, RIGHT 2 and RIGHT 3 parts. When only one part is on, the note played on the
keyboard and effect are sounded by that part.
R1–R3: Applies the effect to the selected part (RIGHT 1, RIGHT 2 or RIGHT 3).
NOTE
This parameter is not available for the Multi Assign type.
This parameter is available when one of the Harmony Types is selected. When this is
set to "ON," the Harmony effect is applied only to the notes (played in the right-hand
section of the keyboard) that belongs to a chord played in the chord section of the key-
board.
This parameter is available for all types with the exception of "Multi Assign." It deter-
mines the lowest velocity value at which the harmony note will sound. This allows
you to selectively apply the harmony by your playing strength, letting you create har-
mony accents in the melody. The harmony effect is applied when you play the key
strongly (above the set value).
NOTE
When the [MONO] button is turned to
on or you use the S.Art!/S.Art2! Voices,
the Harmony/Echo effect may not work
properly.
NOTE
The available Harmony/Echo types dif-
fer when an Ensemble Voice is selected.
4