Yamaha Tyros5 Reference Manual page 109

Tyros5 series digital workstation
Hide thumbs Also See for Tyros5:
Table of Contents

Advertisement

 Editing the Part Tab Parameters
The parameters are arranged in a matrix.
Use the [A]–[E] buttons to select the desired parameter, then edit each of the Vocal Parts
including the Harmony notes (Harm.1, 2, 3) and Lead voice (your own voice) via the
[3 ]–[8 ] buttons.
For information on each parameter, see below.
 TRANSPOSE (selected by [A] button)
Determines the pitch transposition for each part. The range for all parts is the same; however, the lead vocal sound
can only be adjusted in octaves. When the Chordal Type is set to ScaleDiatonic, this parameter changes to Degree.
When Pitch Correct is set to Off, the Lead part is not available. When the Vocoder or Vocoder-Mono mode is
selected, the Harmony parts are not available.
TRANSPOSE Settings
Lead: -3 octaves – +3 octaves
Harmony 1, 2, 3: -36 semitones – +36 semitones
DEGREE Settings
Lead: -3 octaves – +3 octaves
Harmony 1, 2, 3: -3 octaves (-22 scale degrees) – Unison – +3 octaves (+22 scale degrees)
 DETUNE (selected by [B] button)
Determines the fine pitch setting for each part. Adjust this to produce a warm chorusing effect, or to achieve a nat-
ural, less-than-perfect vocal sound. When Pitch Correct is set to Off, the Lead part is not available.
Settings: -50 cents – +50 cents
 FORMANT (selected by [C] button)
Determines the formant setting for each part. This parameter can be used to finely change the character of the
vocal sound. The higher the value, the more "feminine" the harmony voice becomes. The lower the value, the more
"masculine" the voice. When Pitch Correct is set to Off, the Lead part is not available.
Settings: -62 – +62
 PAN (selected by [D] button)
Determines the pan position setting for each part. Setting each vocal part to a different pan position, with the lead
vocal at center, for example, results in a naturally wide stereo sound.
Settings: L63 (Left) – C (Center) – R63 (Right)
 VOLUME (selected by [E] button)
Determines the volume setting for each part. Use this to adjust the relative level balance among the vocal parts.
Settings: 0–127
Tyros5 Reference Manual
8
109

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tyros5-76Tyros5-61

Table of Contents