Setting The Bass Note For Style Playback Via Midi Receive; Setting The Chord Type For Style Playback Via Midi Receive - Yamaha Tyros4 Reference Manual

Setting the Bass Note for Style Playback via MIDI Receive

The explanations here apply to the BASS Page in step 4 on
Style playback, based on the note messages received via MIDI. The note on/off messages received at the channel(s) set to
"ON" are recognized as the bass note of the chord of Style playback. The bass note will be detected regardless of the
[ACMP] or split point settings. When several channels are simultaneously set to "ON," the bass note is detected from
merged MIDI data received over the channels.
1
1
Use the [A]/[B] buttons to select the channel.
2
Use the [1 ]–[8 ] button to set the desired channel to ON
or OFF.
You can also set all channels to OFF by pressing the [I] (ALL OFF) button.

Setting the Chord Type for Style Playback via MIDI Receive

The explanations here apply to the CHORD DETECT Page in step 4 on
chord type for Style playback, based on the note messages received via MIDI. The note on/off messages received at the
channel(s) set to "ON" are recognized as the notes for detecting chords in Style playback. The chords to be detected
depend on the fingering type. The chord types will be detected regardless of the [ACMP] or split point settings. When
several channels are simultaneously set to "ON," the chord type is detected from merged MIDI data received over the
channels.
The operation procedure is basically the same as that of the BASS display above.
2
page 124. These settings let you determine the bass note for
page 124. These settings let you determine the
Tyros4 Reference Manual
11
129