Table of Contents
Advertisement
Style and Groove Settings
Adjusting the Volume of the Style
or Groove
You can adjust the volume balance between Style or
Groove playback and your keyboard performance.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [<<] and [>>] but-
tons to call up "StyleVol" (Function 001)
or "GroovVol" (Function 003).
3
Rotate the dial to set the volume
between 000 and 127.
Setting the Split Point
The point on the keyboard that separates the left-
hand area and the right-hand area of the keyboard is
called the "Split Point." The left-hand area is used to
specify the chord for Style playback, to specify the
key for Groove playback, or to play the Split Voice.
The default Split Point is key number 054 (the F#2
key), but you can change it to another key.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [<<] and [>>] but-
tons to call up "SplitPnt" (Function 009).
You can call up this display also by pressing the
[STYLE] then holding the [ACMP] button for lon-
ger than a second.
62
PSR-E463/PSR-EW410 Owner's Manual
StyleVol
001
100
Style (or Groove) volume
SplitPnt
009
054
Split Point
3
Rotate the dial to set the Split Point
between 036 (C1) and 096 (C6) (on the
PSR-E463) or 028 (E0) and 103 (G6) (on
the PSR-EW410).
Split Point ... default value: 054 (F#2)
060
036
048
(C3)
(C1)
(C2)
Main Voice (and Dual Voice)
Split Voice,
chords (Style) or
keys (Groove)
Playing Chords Without Style
Playback (Stop Accompaniment)
If you press the [STYLE] button, press the [ACMP
ON/OFF] button to turn ACMP on (the ACMP ON
icon appears), and play the chord in the Auto Accom-
paniment area of the keyboard (with SYNC START
off), the chord sound will be heard without Style play-
back. This is referred to as "Stop Accompaniment."
The specified chord will be shown in the display, and
affects the Harmony function (page 22).
Appears when auto accom-
paniment is on
Auto Accompani-
ment area
072
084
096
(C4)
(C5)
(C6)
Specified
chord
Advertisement
Table of Contents
