Midi System Settings - Yamaha Tyros4 Reference Manual

MIDI System Settings

The explanations here apply to the SYSTEM Page in step 4 on
Use the [A]/[B] buttons to select the parameters (below), then set the ON/OFF status by using the [1
tons.
1 Local Control
Turns the Local Control for each part on or off. When Local Control is set to "ON," the
keyboard of the Tyros4 controls its own (local) internal tone generator, allowing the inter-
nal Voices to be played directly from the keyboard. If you set Local to "OFF," the key-
board and controllers are internally disconnected from the Tyros4's tone generator section
so that no sound is output when you play the keyboard or use the controllers. For example,
this allows you to use an external MIDI sequencer to play the Tyros4's internal Voices, and
use the Tyros4 keyboard to record notes to the external sequencer and/or play an external
tone generator.
2 Clock setting, etc.
 CLOCK
Determines whether the Tyros4 is controlled by its own internal clock or a MIDI clock
signal received from an external device. INTERNAL is the normal Clock setting when
the Tyros4 is being used alone or as a master keyboard to control external devices. If you
are using the Tyros4 with an external sequencer, MIDI computer, or other MIDI device,
and you want to synchronize it to that device, set this parameter to the appropriate set-
ting: MIDI A, MIDI B, USB 1, or USB 2. In this case, make sure that the external device
is connected properly (e.g., to the Tyros4's MIDI IN terminal), and that it is properly
transmitting a MIDI clock signal.
 TRANSMIT CLOCK
Turns MIDI clock (F8) transmission on or off. When set to OFF, no MIDI clock or Start/
Stop data is transmitted even if a Song or Style is played back.
 RECEIVE TRANSPOSE
Determines whether or not the Tyros4's transpose setting is applied to the note events
received by the Tyros4 via MIDI.
 START/STOP
Determines whether incoming FA (start) and FC (stop) messages affect Song or Style
playback.
3 MESSAGE SW (Message Switch)
 SYS/EX.
The "Tx" setting turns MIDI transmission of MIDI System Exclusive messages on or
off. The "Rx" setting turns MIDI reception and recognition of MIDI System Exclusive
messages generated by external equipment on or off.
 CHORD SYS/EX.
The "Tx" setting turns MIDI transmission of MIDI chord exclusive data (chord detect.
root and type) on or off. The "Rx" setting turns MIDI reception and recognition of MIDI
chord exclusive data generated by external equipment on or off.
126
Tyros4 Reference Manual
page 124.
 
]–[8 ] but-
NOTE
If the Clock is set other than INTERNAL,
the Style, Song or Multi Pad cannot be
played from the panel buttons.