Using A Pedal (Sustain); Backup And Initialization; Backup Parameters; Initialization - Yamaha PSR-E360 Owner's Manual

Using a Pedal (Sustain)

You can produce a natural sustain as you
play by pressing a footswitch (FC5 or FC4A;
sold separately) plugged into the [SUSTAIN]
jack.
NOTE
• Plug or unplug the footswitch while the power is
off. Also, do not press the footswitch when turning
the power on. Doing so changes the polarity of
the footswitch, resulting in reversed operation.
• There are some Voices to which sustain is not
applied.
• The sustain function does not affect style (auto-
matic accompaniment; page 25).
• Some voices may sound continuously or have a
long decay after the notes have been released
while the footswitch is held.

Backup and Initialization

Backup Parameters

The following Backup parameters will be maintained even if the power is turned
off.
Backup parameters
• User Songs (page 28)
• FUNCTION Settings: (page 32)
Tuning, Your Tempo, Master EQ type, Touch Response, Auto Power Off,
Battery Type
NOTICE
Note that the following situations cannot back up or maintain the settings of the Backup
parameters.
• When the AC adaptor is unplugged with the power on (even if batteries are installed):
• When the power is turned off due to accidents such as electric power failure:
• When the Alkaline battery/Manganese battery runs down (without connecting the AC adap-
tor):

Initialization

You can initialize the backup data via the following method.
While holding down the highest white key, press the [
to turn the power on.
] (Standby/On) switch
31
PSR-E360 Owner's Manual