Error Indicator; Operating Problems - Epson Perfection 610 User Manual

Error indicator

If an error occurs, the scanner stops operating and the carriage
lamp shows the type of error.
Pattern of
light
F
(Rapidly
flashing )
O
N = on, O = off, F = flashing
Note:
The scanner will turn off the fluorescent lamp if it does not receive any
commands from the computer within 10 minutes.

Operating problems

Problems you may have while using the scanner often involve the
operation of your software and computer. Operation problems
usually occur because of:
❏ Incorrect setup of the interface (see Chapter 3).
Problem and solution
Cause 1: The interface setup is wrong, or the
scanner is not properly connected to the
computer.
What to do 1: Check the interface connection. Then
turn the scanner off and back on to
initialize the scanner again.
Cause 2: The transportation lock is not released or
the scanner is broken.
What to do 2: Make sure that the transportation lock is in
the unlocked position; then turn the
scanner off and then back on. If the
scanner still does not operate properly, or
if this error occurs repeatedly, consult your
dealer.
Cause: The lamp is worn out.
What to do: Consult your dealer.
Maintenance and Troubleshooting
6
6-5