Scanning Procedure
This chapter shows you how the scanner operates. The basic
procedure for scanning is as follows:
1. Plug in the scanner.
2. Place the document you want to scan on the document table.
(This is described in detail below.)
3. Run the scanner software and scan. (See page 4-7 for details
on scanning.)
Placing a Document on the Scanner
Before scanning a document, remember to respect the rights of
copyright owners. Do not scan published text or images without
first checking the copyright status.
1. Plug in the scanner . The fluorescent lamp in the carriage turns
on.
4-2
Using Your Scanner