Error Indicator - Epson 1200 series User Manual

Error indicator

If an error occurs, the scanner stops operating and the operate
light shows the type of error.
Pattern of
light
F
(Rapidly
flashing
red)
F
(Rapidly
flashing
orange)
N = on, O = off, F = flashing
Problem and solution
Cause 1: The interface setup is wrong, or the
scanner is not properly connected to the
computer.
What to do 1: Check the interface connection. Then
turn the scanner off and back on to
initialize the scanner again.
Cause 2: The transportation lock is not released, the
fluorescent lamp needs to be replaced, or
the scanner is broken.
What to do 2: Make sure that the transportation lock is in
the unlocked position; then turn the
scanner off and then back on. If the
scanner still does not operate properly, or
if this error occurs repeatedly, consult your
dealer.
Cause 1: The cover of the optional Automatic
Document Feeder is open, or the release
lever is pressed and paper feeding unit is
slightly open.
What to do 1: Make sure that the cover of optional
Automatic Document Feeder is closed
and/or push the paper feeding unit down
until it clicks into place.
Cause 2: No paper is loaded, or paper is jammed in
the Automatic Document Feeder.
What to do 2: Load paper in the Automatic Document
Feeder, or turn the scanner off and
remove the jammed paper from the
Automatic Document Feeder. See page
6-16 or 6-20 for details.
Maintenance and Troubleshooting
7
7-9