Initialization - Epson Perfection 610 User Manual

Initialization

Before connecting the scanner to your computer, follow the steps
below to make sure that the scanner is operating properly.
1. If the scanner is plugged in, unplug the scanner and wait 10
seconds.
2. Open the document cover so you can see the operation of the
scanner during initialization (startup).
3. Plug in the scanner.
4. Make sure the fluorescent lamp on the carriage turns on, and
the carriage moves slightly.
5. The fluorescent lamp stays on, meaning the scanner has
completed initialization.
6. Unplug the scanner.
If the scanner does not work as described, make sure the power
cord is firmly plugged in and that you have released the
transportation lock, then try again.
2-6
Setting Up the Scanner