Epson Perfection 610 User Manual page 80

❏ Incorrect setup of your computer or software (see Chapter 3
in this guide or the software documentation).
❏ Incorrect operation of your software (see Chapters 4 and 5).
Also see the documentation that came with your computer and
printer for possible solutions.
The fluorescent lamp does not come on.
Cause
The scanner is not
connected correctly.
Normal power saving
function
The scanner does not scan.
Cause
The scanner is not ready
to scan.
More than one USB hub
is in use, or the cable is
unsuitable.
6-6
Maintenance and Troubleshooting
What to do
Make sure the power cord is
connected to the scanner and plugged
into a power outlet.
If the scanner does not receive any
commands after 10 minutes, it turns
off the lamp. The lamp will turn back
on when you scan.
What to do
Wait until the fluorescent lamp stays
on (ready for scanning).
Try connecting the scanner directly
to the computer's USB port, or use an
EPSON USB cable .