Table of Contents
Advertisement
Scanner Basics
>
Information on Applications
Error Indicators
Scanner errors
Indicators
Flashing slowly
On
Flashing fast
Flashing fast
On
On
Off
On
On
Related Information
"Removing Jammed Originals from the Scanner" on page 166
&
Information on Applications
This section introduces the application products available for your scanner. The latest application can be installed
at the Epson Web site.
Application for Scanning Documents (Document Capture Pro /
Document Capture)
*
Document Capture Pro
is an application that allows you to efficiently scan originals such as documents.
You can register a set of operations, such as Scan-Save-Send, as a "job". By registering a series of operations in
advance as a job, you can perform all of the operations by simply selecting the job. By assigning a job to the button
on scanner's control panel, you can start a job by pressing the button.
See the Document Capture Pro help (Windows) or Document Capture (Mac OS) for details on using the
application.
* The name is for Windows. For Mac OS, the name is Document Capture.
>
Application for Scanning Documents (Document Capture Pro / Do
Situation
A paper jam or double feed occurred.
The scanner cover is opened.
A fatal error has occurred.
The scanner has started in recovery
mode because the firmware update
failed.
22
Solutions
Open the scanner cover, and then re-
move jammed originals. Close the cov-
er to release the error. Load the origi-
nals again.
Close the scanner cover.
Turn the power off and on again. If the
error continues to occur, contact your
local dealer.
Follow the steps below to try to up-
date the firmware again.
1. Connect the computer and the scan-
ner with a USB cable. (During recovery
mode, you cannot update the firm-
ware over a network connection.)
2. Visit your local Epson website for fur-
ther instructions.
...
Advertisement
Table of Contents
