Error indicator
When an error occurs, the scanner stops operating and the ERROR
and READY lights indicate the error type as described below.
ERROR Light
On
Flashing
Flashing
Off
Command error
The scanner has received incorrect commands from your
scanning software.
When this error occurs, try to rescan the document. The scanner
returns to normal when it receives correct commands. Normally
you do not need to reset the scanner when this type of error
occurs.
Interface error
The interface setup is wrong or the scanner is not properly
connected to the printer.
When this error occurs, check the interface connection and then
push the Poperate button to turn the scanner off and then back
on again to reset it.
Fatal error
This type of error indicates one of the following problems:
The fluorescent lamp needs to be replaced.
The transportation lock lever is not released.
7-6
Maintenance and Troubleshooting
READY Light
On
Off
Flashing
Off
Error Type
Command error
Interface error
Fatal error
Option error