Figure 34: Installing The Front Mounting Hardware For A Four-Post Rack Or - Juniper MX240 Hardware Manual

MX240 3D Universal Edge Router Hardware Guide
66
Install the small shelf on the back of the rack rails. Rest the bottom slot of each flange
3.
on a mounting screw.
Partially insert the remaining screws into the open holes in each flange of the small
4.
shelf (see Figure 34 on page 66
Tighten all the screws completely.
5.
Figure 34: Installing the Front Mounting Hardware for a Four-Post Rack
or Cabinet
or Figure 35 on page 67).
Copyright © 2013, Juniper Networks, Inc.