General Laser Safety Guidelines For Juniper Networks Devices; Laser Safety Warnings For Juniper Networks Devices; Class 1 Laser Product Warning - Juniper MX240 Hardware Manual

MX240 3D Universal Edge Router Hardware Guide
Related
Documentation

General Laser Safety Guidelines for Juniper Networks Devices

Related
Documentation

Laser Safety Warnings for Juniper Networks Devices

234
General Safety Guidelines for Juniper Networks Devices on page 223
General Safety Warnings for Juniper Networks Devices on page 224
MX240 Site Preparation Checklist on page 55
Removing Components from the MX240 Router Before Installing It Without a Lift on
page 81
Installing the MX240 Chassis in the Rack Manually on page 86
Installation Safety Warnings for Juniper Networks Devices on page 228
Devices with single-mode optical interfaces are equipped with laser transmitters, which
are considered a Class 1 Laser Product by the U.S. Food and Drug Administration, and
are evaluated as a Class 1 Laser Product according to EN 60825–1 +A11 +A2 requirements.
When working around devices with optical interfaces, observe the following safety
guidelines to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
Laser Safety Warnings for Juniper Networks Devices on page 234
General Safety Warnings for Juniper Networks Devices on page 224
Class 1 Laser Product Warning on page 234
Class 1 LED Product Warning on page 235
Laser Beam Warning on page 235
Radiation from Open Port Apertures Warning on page 236

Class 1 Laser Product Warning

WARNING: Class 1 laser product.
Waarschuwing Klasse-1 laser produkt.
Copyright © 2013, Juniper Networks, Inc.