Juniper MX240 Hardware Manual page 48

MX240 3D Universal Edge Router Hardware Guide
24
For a complete list of media types, see Interface Naming Overview.
fpc—Slot in which the MPC is installed. On the MX240 router, the MPCs are represented
in the CLI as through
FPC 0
pic—Logical PIC on the MIC, numbered 0 or 1 when installed in MIC slot 0 and 2 or 3
when installed in MIC slot 1. The number of logical PICs varies depending on the type
of MIC. For example, a:
20-port Gigabit Ethernet MIC has two logical PICs, numbered 0 and 1 when installed
in MIC slot 0 or 2 and 3 when installed in MIC slot 1.
4-port 10-Gigabit Ethernet MIC has two logical PICs numbered 0 and 1 when installed
in MIC slot 0 or 2 and 3 when installed in MIC slot 1.
100-Gigabit Ethernet MIC with CFP has one logical PIC numbered 0 when installed
in MIC slot 0 or 2 when installed in MIC slot 1.
For more information on specific MICs, see MICs Supported by MX Series Routers in the
MX Series Interface Module Reference
port—Port number.
NOTE: The MIC number is not included in the interface name.
The MX240 router supports up to three MPCs that install horizontally and are numbered
from bottom to top. Each MPC accepts up to two MICs.
Figure 14 on page 25 shows a 20-port Gigabit Ethernet MIC with SFP installed in MIC
slot 0 of an MPC in slot 2 .
.
FPC 2
.
Copyright © 2013, Juniper Networks, Inc.