Installation Safety Warnings For Juniper Networks Devices; Installation Instructions Warning - Juniper MX240 Hardware Manual

MX240 3D Universal Edge Router Hardware Guide
Related
Documentation

Installation Safety Warnings for Juniper Networks Devices

228
use this type of inert oxygen displacement extinguisher instead of an extinguisher that
leave residues on equipment.
Do not use multipurpose Type ABC chemical fire extinguishers (dry chemical fire
extinguishers) near Juniper Networks devices. The primary ingredient in these fire
extinguishers is monoammonium phosphate, which is very sticky and difficult to clean.
In addition, in minute amounts of moisture, monoammonium phosphate can become
highly corrosive and corrodes most metals.
Any equipment in a room in which a chemical fire extinguisher has been discharged is
subject to premature failure and unreliable operation. The equipment is considered to
be irreparably damaged.
NOTE: To keep warranties effective, do not use a dry chemical fire extinguisher
to control a fire at or near a Juniper Networks device. If a dry chemical fire
extinguisher is used, the unit is no longer eligible for coverage under a service
agreement.
We recommend that you dispose of any irreparably damaged equipment in an
environmentally responsible manner.
General Safety Guidelines for Juniper Networks Devices on page 223
General Safety Warnings for Juniper Networks Devices on page 224
General Electrical Safety Warnings for Juniper Networks Devices on page 242
DC Power Electrical Safety Warnings for Juniper Networks Devices on page 249
Observe the following warnings before and during hardware equipment installation:
Installation Instructions Warning on page 228
Rack-Mounting Requirements and Warnings on page 229
Ramp Warning on page 232

Installation Instructions Warning

WARNING: Read the installation instructions before you connect the hardware
equipment to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem
met de voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter
les directives d'installation.
Copyright © 2013, Juniper Networks, Inc.