Entering System View; Exiting The Current View - 3Com 4500G Family Configuration Manual

To do...
Display the current validated
configurations of the device
Display the configuration saved
on the storage media of the
device
For details of the display saved-configuration command, refer to File System Management
Commands in the System Volume.

Entering System View

After you log in to the device, you will automatically enter user view. At this time, the system displays
<Device name>. You can perform limited operations in user view, such as display operations, file
operations, and Telnet operations. To perform further configurations of the device, enter system view.
Follow the step below to enter system view:
To do...
Enter system view from user
view

Exiting the Current View

The system divides the command line interface into multiple command views, which adopts a
hierarchical structure. For example, there is system view under user view, and interface view and VLAN
view under system view. After you have configured the functions under the current view, you can
perform the following operations to exit the current view.
Follow the step below to exit the current view:
To do...
Return to an upper level view
from the current view
Use the command...
display current-configuration
[ [ configuration [ configuration ] |
interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ |
{ begin | exclude | include }
regular-expression ] ]
display saved-configuration
[ by-linenum ]
Use the command...
system-view
Use the command...
quit
1-2
Remarks
Remarks
Required
Available in user view
Remarks
Required
If the current view is user view,
the command terminates the
connection between the user
terminal and the device.
Available in any view.