Configuring Authentication And Authorization On The Ftp Server - 3Com 4500G Family Configuration Manual

24/48 port
Hide thumbs Also See for 4500G Family:
Table of Contents

Advertisement

To do...
Set the file update mode for the
FTP server
Quit to user view
Manually release the FTP
connection established with the
specified username

Configuring Authentication and Authorization on the FTP Server

To allow an FTP user to access certain directories on the FTP server, you need to create an account for
the user, authorizing access to the directories and associating the username and password with the
account.
The following configuration is used when the FTP server authenticates and authorizes a local FTP user.
If the FTP server needs to authenticate a remote FTP user, you need to configure authentication,
authorization and accounting (AAA) policy instead of the local user. For detailed configuration, refer to
AAA Configuration in the Security Volume.
Follow these steps to configure authentication and authorization for FTP server:
To do...
Enter system view
Create a local user and enter its
view
Assign a password to the user
Assign the FTP service to the
user
Configure user properties
Use the command...
ftp update { fast | normal }
quit
free ftp user username
Use the command...
system-view
local-user user-name
password { simple | cipher }
password
service-type ftp
authorization-attribute { acl
acl-number | callback-number
callback-number | idle-cut
minute | level level |
user-profile profile-name |
vlan vlan-id | work-directory
directory-name } *
2-8
Remarks
Optional
Normal update is used by
default.
Optional
Available in user view
Remarks
Required
No local user exists by default,
and the system does not
support FTP anonymous user
access.
Required
Required
By default, the system does not
support anonymous FTP
access, and does not assign
any service. If the FTP service
is assigned, the root directory
of the device is used by default.
Optional
By default, the FTP/SFTP
users can access the root
directory of the device, and the
user level is 0. You can change
the default configuration by
using this command.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents