System Volume - 3Com 4500G Family Configuration Manual

Features
DLDP
Ethernet OAM
CFD
Track

System Volume

Table 3-8 Features in the System volume
Features
Login
In the use of fibers, link errors, namely unidirectional links, are likely to
occur. DLDP is designed to detect such errors. This document describes:
DLDP Introduction
Enabling DLDP
Setting DLDP Mode
Setting the Interval for Sending Advertisement Packets
Setting the DelayDown Timer
Setting the Port Shutdown Mode
Configuring DLDP Authentication
Resetting DLDP State
Ethernet OAM is a tool monitoring Layer-2 link status. It helps network
administrators manage their networks effectively. This document
describes:
Ethernet OAM overview
Configuring Basic Ethernet OAM Functions
Configuring Link Monitoring
Enabling OAM Loopback Testing
CFD is an end-to-end, per-VLAN link-layer OAM mechanism for link
connectivity detection, fault verification, and fault location. This document
describes:
Connectivity Fault Detection Overview
Basic Configuration Tasks
Configuring CC on MEPs
Configuring LB on MEPs
Configuring LT on MEPs
The track module is used to implement collaboration between different
modules through established collaboration objects. The detection
modules trigger the application modules to perform certain operations
through the track module. This document describes:
Track Overview
Configuring Collaboration Between the Track Module and the
Detection Modules
Configuring Collaboration Between the Track Module and the
Application Modules
Upon logging into a device, you can configure user interface properties
and manage the system conveniently. This document describes:
How to log in to your Ethernet switch
Introduction to the user interface and common configurations
Logging In Through the Console Port
Logging In Through Telnet
Logging in Through Web-based Network Management System
Logging In Through NMS
Specifying Source IP address/Interface for Telnet Packets
Controlling Login Users
3-8
Description
Description