Enabling Interactive Mode - Ricoh PJ WX4141n Operating Instructions Manual

6. Using the Interactive Function (RICOH PJ WX4141NI only)
Step
3 Enable the projector to recognize the electronic
pen.
4 Install RICOH PJ Interactive Software on a
computer.
• You only need to perform Steps 1 to 3 to use the electronic pen to operate the computer from its
projected image.
• You must perform Steps 1 to 4 to write and draw on the screen.

Enabling Interactive Mode

In Interactive Mode, the projector can recognize the electronic pen and the computer USB adapter.
We recommend disabling wireless LAN communication when you enable Interactive Mode. To disable
wireless LAN communication, select [Wired LAN] or [Disable] in [Network Interface] under [Network
Settings]. For details, see page 123 "Network Settings Menu".
1. Turn on the projector to project the screen.
For details about how to turn on the projector, see page 35 "Turning On the Projector".
2. Press the [Menu] button.
3. Select [Default Settings 1], and then press the [ ] button.
84
Setting Contents
CZE040
Reference
page 88 "Enabling the Projector
to Recognize the Electronic Pen"
page 90 "Installing RICOH PJ
Interactive Software"