Projecting Images Using Dlna-Compatible Devices; Preparation; Projecting Images From Dlna-Compatible Devices - Ricoh PJ WX4141n Operating Instructions Manual

Projecting Images Using DLNA-Compatible
Devices
The projector can project still images and videos transmitted from DLNA-compatible devices.
• For details about the supported file types for this function, see page 75 "Using the Server Function".

Preparation

To project files transmitted from DLNA-compatible devices, specify the following settings:
• Connect the projector to a network using [Network Settings]
• Select [Enable] in [Remote Projection Control] under [Network Application Settings]
For details, see page 123 "Network Settings Menu" and page 131 "Network Application Settings
Menu".
The DLNA-compatible devices also must be connected to a network. For details about how to use
DLNA-compatible devices, see the manuals provided with the DLNA-compatible devices.
• Depending on the device used for this function, you may need to install a DLNA application on the
device.

Projecting Images from DLNA-Compatible Devices

For basic operations, such as how to turn on the projector or adjust the focus, see page 35 "Projecting
an Image".
The procedure of the DLNA-compatible device described below is an outline of the basic flow. The
detailed procedure varies depending on the device and application. For details, see the manuals
provided with the device and application.
1. Turn the projector on.
2. Press the [Input] button to switch the input signal to [Network PC].
The standby screen for [Network PC] input appears.

Projecting Images Using DLNA-Compatible Devices

81