When the projector recognizes the electronic pen, the indicator lights up in green or flickers rapidly.
7. USB connecter
Used to connect the electronic pen charge cable. See page 97 "Recharging the Electronic Pen".
8. Power switch
Switches the power of the electronic pen between on and off.
How to Use the Electronic Pen
When the pen nib is pointed toward the screen projected by the projector in Interactive Mode, the
electronic pen is recognized and the pointer on the projected computer screen can be operated with the
electronic pen. See page 88 "Enabling the Projector to Recognize the Electronic Pen".
You can operate the computer projection screen by touching it with the pen nib—you can select an icon
or menu, or write and draw. You may also touch the pen nib twice on the same position of the screen,
much like the double-click of a mouse.
• Operate the electronic pen so that the pen nib does not point toward a shadowed area.
When the projector is installed on a table or the floor
Hold the electronic pen as shown below. If the nib or bottom of the electronic pen is held, the
position of the electronic pen will not be recognized correctly.
CWD014
CZD017
Using the Electronic Pen
93