USB Settings Menu
This section explains the items in the USB Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the USB Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Remove USB Mem.] in [Settings]
• [USB Memory Free Space (KB)] and [USB Memory Access Status] in [Display Status]
On Web Image Monitor, you can check [Network/USB Func. Firmware Version] and [Energy Saving
IO Firmware Version] on the top page.
For details about Web Image Monitor, see page 159 "Managing the Projector Using Web Image
Monitor".
Settings
Still Image
Display Effect
Select the display effect for switching the image.
• None
• Push
The current image is pushed off by the next image.
• Wipe
The current image is wiped off by the next image.
• Fade
The current image fades out and the next image fades in.
Display Interval (sec.)
Enter the slide show switching interval from 5 to 999 seconds.
Moving Image
Repeat
Specify whether or not to repeat video playback.
Item
Item
USB Settings Menu
Default
None
5 seconds
Default
Off
121