Network Settings Menu; Wired Lan - Ricoh PJ WX4141n Operating Instructions Manual

Network Settings Menu

This section explains the items in the Network Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the Network Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Simple Wireless LAN Setup] and [Reset Wireless LAN Settings] in [Wireless LAN]
• [Import Device Certificate] and [Certificate List] in [LAN Common]
• [Network Setting Wizard] in [Setup Wizard]
On Web Image Monitor, you can check [Network/USB Func. Firmware Version] and [Energy Saving
IO Firmware Version] on the top page.
For details about Web Image Monitor, see page 159 "Managing the Projector Using Web Image
Monitor".

Wired LAN

Wired LAN Settings
Transmission Speed
Select a wired LAN speed that matches your network environment. It
is recommended that [Auto-Negotiation] be selected.
• Auto-Negotiation
• 10BASE-T Full Duplex
• 10BASE-T Half Duplex
• 100BASE-TX Full Duplex
• 100BASE-TX Half Duplex
TCP/IP Settings
DHCP
Specify whether to enable or disable DHCP.
The IP address is allocated automatically from the DHCP server when
[Enable] is selected. When [Disable] is selected, enter the IP address,
subnet mask, and default gateway manually.
Item
Item
Network Settings Menu
Default
Auto-Negotiation
Default
Enable
123