Login To Edit Mode - Ricoh PJ WX4141n Operating Instructions Manual

Browse Mode
This mode requires no user login.
In browse mode, you can check the projector status and settings, but you cannot change the
projector settings.
Edit Mode
The administrator password is required for the user to log in to the edit mode.
In edit mode, you can check the projector status and settings, and also change the projector
settings.
• When [Administrator Authentication] in [Network Application Settings] is set to [Off], you can use
Web Image Monitor in edit mode without entering a password.

Login to Edit Mode

1. On Top Page, click [Login].
2. Enter the administrator password, and then click [Login].
Enter the password that is specified in [Administrator Password] under [Network Application
Settings].
• Depending on the configuration of your web browser, the password might be saved. If you do not
want to save the password, configure your web browser's settings so that this information is not
saved.
Managing the Projector Using Web Image Monitor
161