Using The Interactive Function (Ricoh Pj Wx4141Ni Only); Preparations For Using The Interactive Function - Ricoh PJ WX4141n Operating Instructions Manual

6. Using the Interactive Function
(RICOH PJ WX4141NI only)
This chapter explains how to use the interactive function.

Preparations for Using the Interactive Function

• To use the interactive function, you must use an RGB cable or an HDMI cable to connect the
projector and computer. You cannot use the interactive function if another type of cable is used for
the connection.
• The interactive function cannot be used when a screen is displayed on the Windows extended
desktop.
The interactive function allows you to operate a computer connected to the projector directly on the
projection screen. You can also write and draw on a projected screen using the included software
"RICOH PJ Interactive Software".
To use the interactive function, the following settings are required.
Step
1 Set Interactive Mode to [On].
2 Register the computer USB adapter to the
projector.
Setting Contents
CZE126
Reference
page 84 "Enabling Interactive
Mode"
page 85 "Registering the
Computer USB Adapter"
83