Installing Ricoh Pj Interactive Software - Ricoh PJ WX4141n Operating Instructions Manual

6. Using the Interactive Function (RICOH PJ WX4141NI only)
• If the electronic pen is not recognized correctly after the direction of the pen is corrected
or even when you hold the electronic pen correctly, check the procedure from Step 1 by
referring to page 98 "When You Cannot Use the Interactive Function".

Installing RICOH PJ Interactive Software

RICOH PJ Interactive Software allows you to write and draw on a projection screen. When you use
RICOH PJ Interactive Software, install it on a computer. For details about how to use RICOH PJ
Interactive Software, see Operating Instructions (Interactive Function).
The following operating environment is required to use RICOH PJ Interactive Software.
Item
CPU
Memory
HDD
Operating System
• To install RICOH PJ Interactive Software on a computer, log on as a user with administrator
privileges.
1. Insert the CD-ROM in the CD-ROM drive of your computer.
2. Specify a language and model name, and then click [Select].
3. Click [PJ Interactive Software].
4. Select the language for the installation, and then click [OK].
5. If .NET Framework 4 is not installed on your computer, click [Install].
If .NET Framework 4 has already been installed, the message [Install] does not appear. Proceed to
the next step.
6. Click [Next].
90
® TM
• Intel Core 2 Duo 2 GHz or more recommended
(Minimum: Intel Core Solo U1300)
• Windows XP: 2 GB or more recommended (Minimum: 512 MB)
• Windows 7 / 8 (32 bit): 3 GB or more recommended (Minimum: 1 GB)
• Windows 7 / 8 (64 bit): 4 GB or more recommended (Minimum: 2 GB)
• 9 GB or more free space recommended (Minimum: 2 GB)
• Windows XP Home / Professional SP3 or later (32 bit)
• Windows 7 Home Premium / Professional / Ultimate / Enterprise SP1 or
later (32 bit / 64 bit)
• Windows 8 / Pro / Enterprise (32 bit / 64 bit)
Specifications