Entering Service Mode - Ricoh Sirius-PJ1 nx Service Training

Entering Service Mode

Slide 32
Service manual > Troubleshooting > Service Mode > Mode change
There are two service modes.
Expert Mode
Service Mode
You need to use the remote controller to
access these modes.
Expert mode:
» Help > Top > Left > Help.
» Then press the Menu button to display the
menu.
Service mode:
» Help > Enter > Help > Enter > Help >
Enter. Then press Menu for 3 seconds.
» When the Password menu is displayed,
press Top > Right > Left > Right > Right >
Right > Top > Top > Enter
» Then press the Menu button to display the
menu.
There are two ways to leave Expert or
Service mode
Press the Back button when no menu is
displayed.
Otherwise, press the Power button. The
machine will go to standby mode.
32
Sirius-PJ1Training