Projecting A Computer's Screen Using Quickprojection - Ricoh PJ WX4141n Operating Instructions Manual

• To delete QuickProjection, delete "QuickProjection.exe" and the "QuickProjection" folder in
"%appdata%\RICOH". For details about how to delete QuickProjection, see QuickProjection Help.
• Two versions of QuickProjection are available for Mac OS, one supports audio and the other does
not.

Projecting a Computer's Screen Using QuickProjection

• To project images by ad hoc wireless communication, log on to the computer with administrator
privileges.
• Depending on the settings of the computer, the password input screen is displayed when you start
QuickProjection. Enter an administrator's password.
Before projecting a computer's screen using QuickProjection, connect the projector to a network. For
details about how to connect the projector to a network, see page 67 "Connecting the Projector to a
Network".
For basic operations, such as how to turn on the projector or adjust the focus, see page 35 "Projecting
an Image".
1. Turn the projector on.
2. Press the [Input] button to switch the input signal to [Network PC].
The standby screen for [Network PC] input appears.
3. Check the 4-digit number (identification code) on the projection screen.
4. Double-click the "QuickProjection" icon on the computer.
Projecting a Computer's Screen via a Network
CZE101
73