2.
Connect the USB device to the USB port on the projector.
Check the port orientation before connecting.
3.
Press the [Power] button.
The confirm screen appears.
4.
Press the [Power] button.
The projector beeps and enters the standby mode.
• For details about the USB devices and files supported by the projector, see page 47 "Requirements
for Projecting Images from a USB Device".
• Do not disconnect the power cord when using the power timer function. The projector cannot start if
the power cord is disconnected.
Customizing a Slide Show
You can customize the display effect and display interval for a slide show. These functions are useful for
decorating shop windows more effectively.
Changing the display effect for a slide show
You can change the display effect for switching images. The available display effects are the following:
Push
The current image is pushed off by the next image.
CZE121
Projecting Images in a Slide Show
59