Network Application Settings Menu; Administration Tools - Ricoh PJ WX4141n Operating Instructions Manual

Network Application Settings Menu

This section explains the items in the Network Application Settings menu under the Network/USB
Settings menu tab.
You can also specify and check the items in the Network Application Settings menu using Web Image
Monitor. However, the following items are available only on the menu screen.
• [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.],
[Crestron WebUI Admin. Password], [Control System IP Address], [Control System IP ID], and
[Control System Port] in [Administration Tools]
• [DLNA Certification Mode] in [Server]
• [@Remote: Firmware Updating] in [Firmware Update]
On Web Image Monitor, you can check [Network/USB Func. Firmware Version] and [Energy Saving
IO Firmware Version] on the top page.
For details about Web Image Monitor, see page 159 "Managing the Projector Using Web Image
Monitor".

Administration Tools

Web Image Monitor
Web Image Monitor
Specify whether or not to allow the projector settings to be changed
and checked using a web browser. To enable this setting, you must
restart Web Image Monitor after making the change. For details
about Web Image Monitor, see page 159 "Managing the Projector
Using Web Image Monitor".
AMX Device Discovery
AMX Device Discovery
Specify whether or not to allow the projector to be controlled and
monitored by AMX Device Discovery. To use this function, an AMX
controller is required in your network environment. For details about
AMX Device Discovery, see the AMX LLC website.
Item
Item
Network Application Settings Menu
Default
Enable
Default
Disable
131