PJLink Password
Enter a password used when setting the PJLink authentication that is
up to 32 characters.
Security
Administrator Authentication
Specify whether or not to set administrator authentication. A administrator
password is required to change this setting.
If administrator authentication is set, a password is required for the
following operations:
• Changing [Transmission WEP Key Number], [Network Key],
[Crestron WebUI User Auth.], [Crestron WebUI User Password],
[Crestron WebUI Admin. Auth.], [Crestron WebUI Admin.
Password], [PJLink Authentication], and [PJLink Password]
• Using the simple wireless LAN setup function and the [Network
Setting Wizard] screen
• Importing or deleting device certificates
• Executing [@Remote: Firmware Updating]
• Turning the projector on or off via a network
• Changing the settings using Web Image Monitor
Administrator Password
Enter the administrator password up to 32 characters. The current
password is required to change the administrator password.
Item
Item
Network Application Settings Menu
Default
(blank)
Default
Off
(blank)
133