Connecting Equipment To The Projector; Connecting A Computer - Ricoh PJ WX4141n Operating Instructions Manual

1. Preparations for Using the Projector

Connecting Equipment to the Projector

• Do not place the power cord and connection cable in a way that might cause someone to trip
and fall. The machine might fall over and cause an injury.
Various equipments can be connected to the projector.
Turn off the power to any equipment before connecting it to the projector. Be sure to read the manual for
the applicable equipment before connecting it to the projector.

Connecting a Computer

• Some computers cannot be connected to the projector. Before connecting a computer to the
projector, check the output terminals and signal compatibility.
Connecting to the RGB out port
Connect an RGB cable to the Computer In port of the projector and to the RGB out port of a computer.
To output audio from the speaker on the projector, connect an audio cable to the Audio In port of the
projector and to the audio out port of a computer.
• Use the RGB cable provided with the projector.
Connecting to the HDMI port
Connect an HDMI cable to the HDMI ports of the projector and the computer.
30
CZE111
CZE112