Wireless Configuration For Windows Using The Océ Installer Application; Configuration In Infrastructure Mode; Before Configuring The Wireless Settings - Oce VL3200x User Manual

Wireless configuration for Windows
4
using the Océ installer application

Configuration in Infrastructure mode

Before configuring the wireless settings

IMPORTANT
• The following instructions will install your machine in a network environment using the Océ installer
application for Windows
• You can also setup your machine using the machine's control panel which we recommended. You can find
instructions in the supplied Quick Setup Guide or see Configuring your machine for a wireless network
on page 19.
• You must know your wireless network settings before you proceed with this installation.
Make sure you take notes on all the current settings such as SSID, authentication and encryption of your
wireless network environment. If you do not know them, contact your network administrator or the
manufacturer of your access point/router.
Check and record the current wireless network settings.
Network name:(SSID, ESSID)
Communication Mode
Infrastructure
1
Pre-Shared Key (PSK) lets the Océ machine associate with access points using TKIP or AES encryption. Pre-Shared Key is 8 or more
characters in length, up to a maximum of 63 characters.
®
found on the CD-ROM we have provided with the machine.
Authentication method
Open system
Shared key
1
Pre-Shared Key
(WPA/WPA2-PSK)
LEAP
EAP-FAST/NONE
EAP-FAST/MS-CHAPv2
EAP-FAST/GTC
Encryption mode
Network key
2
WEP
NONE —
2
WEP
AES
TKIP
CKIP
AES
TKIP
®
4
4
4
4
3
36