Using The Automatic Wireless Setup (Secureeasysetup™, Aoss™, Etc.) Control Panel Menu To Configure Your Machine For A Wireless Network - Oce VL3200x User Manual

Using the automatic wireless setup (SecureEasySetup™, AOSS™, etc.) control
panel menu to configure your machine for a wireless network
If your wireless access point/router supports the automatic wireless setup (SecureEasySetup™, AOSS ™,
etc.), you can configure the machine easily without knowing your wireless network settings. Your Océ
machine has the automatic wireless setup (SecureEasySetup™, AOSS™, etc.) menu on the control panel.
This feature automatically detects which mode your access point uses, SecureEasySetup™, AOSS™, etc.
By pushing a button on the wireless access point/router and the machine, you can setup the wireless network
and security settings. See the user's guide for your wireless access point/router for instructions on how to
access one-push mode.
Note
Routers or access points that support SecureEasySetup™, AOSS™, etc. have the symbols shown below.
a
Plug the machine's power cord into the AC power outlet. Turn on the machine's power switch.
b
Press Menu, 7, 2, 7. Using a or b, choose On and press OK.
Press Stop/Exit.
72.WLAN
7.WLAN Enable
On
a
b Off
Select ab or OK
c
Press Menu, 7, 2, 3 for SES/WPS/AOSS.
This feature will automatically detect which mode (SecureEasySetup™, AOSS™, etc.) your access point
uses to configure your machine.
d
The machine will search for an access point that supports the automatic wireless setup
(SecureEasySetup™, AOSS™, etc.) for 2 minutes.
72.WLAN
3.SES/WPS/AOSS
Setting WLAN
e
Put your access point in the automatic wireless setup (SecureEasySetup™, AOSS™, etc.) mode,
depending on what is supported by your access point. Please refer to the instruction manual that came
with your access point. You will see Connecting AOSS, Connecting SES or Connecting WPS on
the LCD while the machine searches your access point.
Configuring your machine for a wireless network
3
3
33